CALL US NOW
1-800-887-5030

2007-2019 DODGE 6.7L

68RFE TRANSMISSION

BETTER THAN EVER


  • Exclusive BD designed valve body separator plate gasket eliminates damaging internal cross leaks
  • Hard anodized valve body and new solenoid pack installed in every unit
  • Heavy duty cam & roller design low reverse one way clutch
  • New 4C billet spring retainer
  • Steel girdle added to 2C piston to allow for more clutches and broader apply area
  • BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
  • Clutch count increased to hold high torque level - Over Drive 17% increase, Under Drive 20%, 2C 33% increase
  • BD reinforced accumulator plate
  • TCC limit valve machined and sleeved to address high wear area with in pump
  • BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
  • BD ProTect68 pressure control module ramps up line pressure to 250psi using MAP sensor to input load and adjust pressure required

GASKETS MAKE THE DIFFERENCE!

BD Diesel's industry leading custom valve body separator plate gaskets allow for much higher line pressure. Incredibly, they do this with significant reduction in cross leaks that result in many areas of damage, when compared to stock and other applications.

GASKETS MAKE THE DIFFERENCE!

MORE INFO? CHECK OUT THESE VIDEOS


PROTECT 68 PRESSURE CONTROL KIT

  • Deliver up to 250psi clutch apply pressure
  • 50% increasing in holding force to prevent clutch slippage
  • Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
  • Installation takes 2-to-3 hours
  • A "fresh" stock transmission will have the ability to handle up to 500hp
  • Kit includes separator plate and gaskets
  • PROTECT 68 PRESSURE CONTROL KIT

  • Deliver up to 250psi clutch apply pressure
  • 50% increasing in holding force to prevent clutch slippage
  • Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
  • Installation takes 2-to-3 hours
  • A "fresh" stock transmission will have the ability to handle up to 500hp
  • Kit includes separator plate and gaskets
  • BUILD-IT TRANS KIT

  • Same parts used in our own performance transmissions
  • All kits include the basic rebuild parts and gaskets
  • BD Pressure Plate - Lower Machined
  • BD Pressure Plate - Rev Machined
  • Pump Cover
  • Valve Body Accumulator Plate
  • Reverse Clutch Friction Raybestos
  • Reverse Friction
  • Reverse Steel
  • Low Reverse Steel
  • BUILD-IT TRANS KIT

  • Same parts used in our own performance transmissions
  • All kits include the basic rebuild parts and gaskets
  • BD Pressure Plate - Lower Machined
  • BD Pressure Plate - Rev Machined
  • Pump Cover
  • Valve Body Accumulator Plate
  • Reverse Clutch Friction Raybestos
  • Reverse Friction
  • Reverse Steel
  • Low Reverse Steel