1043002
Turbo Install Kit Ford F-150 3.5L Ecoboost 2011-2016
Regular price
$264.95
Sale price
$264.95
Regular price
Unit price
/
per
DEMAND!
PRIORITIZE YOUR SHIPMENT
STOCK
STOCK
VEHICLE APPLICATIONS
Features
Features
- Qty 8 coolant fittings
- Qty 4 double ended Exhaust downpipe studs
- Qty 4 M10 exhaust nuts
- Qty 6 turbocharger bolts
- Gaskets
About This Product
About This Product
Additonal components for installing BD's own 1043001 F-150 3.5L exhaust manifold set. This handy kit supplies everything required to remove and reinstall turbochargers - added peace of mind on engines that have higher mileage
Warranty & Notes
Warranty & Notes
|
Warranty |
WARRANTYParts
|
|---|---|
|
Emissions |
EMISSIONS
|

$264.95
- 5 stars: 24 (92%)
- 4 stars: 1 (4%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 1 (4%)
Excellent product. My only issue was with the bolts that attach the turbo to the manifold. The kit had hex bolts. I would have preferred the torx style or interior hex for ease of installation. There isn’t a lot of room available for a socket so an interior fastener would have worked better
Hardware kit made everything much easier. Highly recommend
Well the original manifold came with 8 bolts. This one comes with 11. And where the extra bolts are is exactly where the stock manifolds warp and snap the studs. Time will tell but appears to be the fix that Ford should’ve come out with in the first place. Quick shipping and an excellent website to navigate!!!
Great quality parts, complete instructions, it’s not an easy job to do on jack stands, but well worth it! Got the in-cab noise back down, +1.5 mpg everywhere and better throttle response. I had 2 broken oem bolts on each manifold when I took them off so we were losing all kinds of power and efficiency, got that back and then some.
It was a bit time consuming on certain parts of the kit, but not BD Diesels fault..thanks Ford! Take your time and read and re-read the directions and it will be done.
Nice quality upgrade components, purchase coolant tubes and engine side connectors to be prepared for whatever happens. Had both rear turbo coolant tubes seized to connectors on turbo (rear) due to corrosion of tube ends. Would be great to replace those tubes (and quick conn.) with stainless hoses with compression fittings. Tube removal was the most difficult part of the repair. Note right side rear tube replacement requires the ac compressor to be pulled back to remove the retaining bolt, the compressor uses a stretch fit belt. Good time to replace those too.
Great..I would buy from BD diesel again...
Great quality, bought this with the replacement of manifold. Turbos replaced at 275k miles for peace of mind. Hope to get another 275
Installed the BD Diesel exhaust manifold on my 2015 F150 3.5 Ecoboost.
Using all 11 studs seems like a no brainer, but it too BD to come up with the 11 stud manifold. Everything fit like a glove and I'm happy to have the rattling manifold gasket noise that accompanies the broken stud and warped original manifold behind me. I would highly recommend this kit.
Excellent!
Excellent both products are the best quality f150 manifolds are the way ford should built them in the first place, thanks.
The manifolds fit perfectly, I hope better than new with the additional studs that BD has designed. Not sure which Ford engineer should get fired. All of the gaskets and hardware provided were perfect. The installation instructions were good with the exception of a part number provided for the fittings for the water connection on the turbo. The published part number is for a diesel engine my Ford parts department told me. The ones in the kit were correct however. I also had troubles to get the studs to screw into the head. after chasing the threads with an M8 tap everything went together nicely. Maybe that step should be included in the instructions?
Overall I am very happy with the product.
Everything went great. All parts were included. Would recommend.
Did not come with the 2 orings and 2 drain tube gaskets
Great fit. Competitive price. Very good step by step instructions. Shipping was longer than advertised. One exhaust gasket was damaged when I got it but didn’t seam to affect anything, I have no doubt that they would have replaced it if I made the request.
I would not hesitate to purchase the kit again.
Very good hardware.
The kit had everything I needed to do the job and at a considerabl cost savings as opposed to going to the dealership.
Joe
Good it's only been one week. They need to be good for about 10 years.
Thank you for making A product to fix Ford's huge problem.
As a full time diesel mechanic I am impressed with the quality of this kit along with the 3.5 eco boost manifolds. It's a serious job but the right components made it easier! A++++
Purchased both the manifold kit and the install kit, instructions are bang on, (follow them exactly people!) parts are top notch quality… install went without a hitch!! Highly recommend BD!!
Excellent package and exceptional price for an upgrade from OEM.
Appears to be well made, and as advertised.
So far so good. So far so good.
Good everything fit properly in the problem I had is fixed definitely recommend it
Great product everything fit well. Highly recommend. If you were to get the Ford parts you only get 8 studs to install. These guys have a 11. This product is made so much better.
Bought this kit as recommended when replacing exhaust manifolds. Available colour instructions made for an easy removal and reinstall.