Ford Injection & Fuel

Ford Injection & Fuel
Choose Application
6.7L 2011-2021

The essential Injector Line Set for the 2011-2021 Ford 6.7L Power Stroke.
This kit includes everything necessary for direct replacement, ensuring an exact fit and exceptional corrosion resistance. Simplify maintenance and ensure your fuel system operates at its best with our high-quality, precisely manufactured components.

The BD Diesel
Engineering Advantage

Overcoming OE Failure Points

Correcting factory fuel-system weaknesses to protect your Power Stroke. Heat-damaged electronics and aging CP4 components can lead to costly metal-debris contamination and fuel-system failure. BD re-engineers these components from the ground up using hardened internals, advanced coatings, and robust conversion kits to address known factory weak points for good.

Precision Micro-Inch Calibration

Eliminating dangerous cylinder-to-cylinder variations. Operating at pressures exceeding 26,000 PSI leaves zero room for error. Every BD injector and pump is matched to micro-inch tolerances and verified using automated, computer-controlled flow benches. This ensures balanced fuel delivery across all cylinders, helping prevent dropped cylinders, high EGTs, and premature engine failure.

Advanced Pressure Management

Maintaining consistent rail pressure under heavy loads. Aggressive tuning and demanding towing conditions can push factory fuel volume beyond its limits, causing dangerous pressure drops. Our engineered fuel components feature optimized internal sealing and upgraded plungers designed to maintain steady rail pressure, complete atomization, and immediate throttle response when your Ford Super Duty needs it most.

Fuel System Selection Guide

  1. Define Your Power Stroke Generation and Fuel System

    Before selecting components, identify your engine model year and Power Stroke generation. The 1994.5–2003 7.3L and 2003–2007 6.0L engines use hydraulically actuated electronic unit injection systems, commonly known as HEUI. The 2008–2010 6.4L introduced a high-pressure common-rail system, while the 2011+ 6.7L Power Stroke uses a high-pressure common-rail fuel system with a CP4-series injection pump in many applications.

  2. Establish Your Horsepower and Performance Goals

    Determine whether the truck requires factory-style replacement components for dependable towing and daily driving or increased-flow components for a modified engine. Stock-calibrated injectors and pumps are intended to restore factory operation, while performance injectors and upgraded pumps provide the additional fuel needed for larger turbochargers, custom tuning, and increased horsepower.

  3. Match Fuel-System Capacity to Injector Demand

    Every part of the fuel system must be capable of supporting the selected injectors. On HEUI-equipped engines, injector performance depends on both adequate fuel supply and proper high-pressure oil-system operation. On common-rail engines, the injection pump must maintain commanded rail pressure as injector flow and engine load increase.

  4. Address Generation-Specific Failure Points

    Each Power Stroke generation has different areas that should be considered when planning an upgrade. HEUI-equipped engines require a healthy high-pressure oil system, while later common-rail applications may benefit from components designed to reduce the risk or impact of high-pressure pump failure. Select upgrades specifically engineered for your engine and model year.

  5. Verify Emissions and Street-Legal Compliance

    Review the product specifications for emissions compliance and CARB Executive Order status where applicable. Confirm that the complete fuel-system configuration is approved for street use in your region before installation.

How Do I Choose The Right BD Fuel Parts For My Ford Power Stroke?

Start with your engine and year range, then choose what you need: Injectors for replacement or performance goals, Injector Line Sets for a complete and reliable install, or Fuel Pumps And Dual Fuel Kits if you need stronger fuel supply support on a 6.7L.

What Ford Applications Are Covered On This Page?

Injectors are available for 6.7L 2017-2024, 6.7L 2011-2016, 6.4L 2008-2010, 6.0L 2003-2007, 7.3L 1999-2003, and 7.3L 1994-1998. Injector line sets and pump options are listed for 6.7L 2011-2016 and 6.7L 2017-2024.

What Makes BD Remanufactured Injectors Different Than Stock?

BD remanufactured injectors are built to provide improved flow and precision over stock models, then assembled and tested to exceed OE specifications.

Do I Need New Injector Lines When Replacing Injectors?

If your lines are corroded, contaminated, leaking, or you want a clean direct replacement while you are in there, replacing them is the right move.

What Is Included With The Injector Line Set?

The injector line set is built as a direct replacement kit and is designed for exact fit and corrosion resistance. Always confirm what is included for your specific application before ordering.

What Fuel Pump Options Are Available For The 6.7L Power Stroke?

This page includes the stock Bosch 6.7L Power Stroke CP4 pump and Venom Dual Fuel Kits designed for durability and improved fuel delivery without extensive modifications.

Can I Talk To A Real Person At BD Before I Buy To Confirm Fitment?

Yes. Call 800-887-5030 to speak with our sales team.