CALL US NOW
1-800-887-5030

TRANSMISSIONS

PART # 1064234FT

TowMaster Dodge 48RE Transmission - 2005-2007 4wd w/TVV Stepper Motor - c/w TapShifter

$5,098.00 USD

41877500690615
CD1064234FT
REQUIRES $1,800.00 USD REFUNDABLE CORE DEPOSIT

Features
  • Increase the durability of your drivetrain
  • Provides manual torque converter lock-up clutch control
  • Works with stock shifting and has gear limiting function
  • Sealed plug-in wiring, no cutting or tapping of wires required
  • Includes new model shift lever, BD control module, BD gear selection display and wiring harness
  • Stock thrust bushings replaced with roller Torrington bearings
  • Every transmission is tested on a dyno
  • Upgraded Valvebody
  • Increased line pressure to 190-200psi
  • No shuttle shifting problems
  • Drilled intermediate shaft for increased lubrication
  • Modified manual valve for lube in all positions
  • Billet band strut
  • Billet band lever
  • Clutch Count: OD 6
  • Clutch Count: OD DIRECT 10
  • Clutch Count: FORWARD 5
  • Clutch Count: DIRECT 6
  • High temp/energy Raybestos band
  • Upgraded governor pressure transducer (47RE/48RE) - Twice the burst pressure than stock
  • Upgraded governor solenoid
  • Cooler line case saver in every transmission
  • BD auxiliary full flow filter kit for extra protection
  • BD rigid aluminum heavy duty transmission pan
  • Pan heat-dissipating fins keep temperature down
  • Magnetic drain plug
  • Pan adds 2qt extra oil capacity
  • Not warranted for Race or Sled Pull use
ABOUT THIS PRODUCT

This transmission comes BD Tapshift ready which includes a new gear lever, gear selection display, and control module with fingertip shifting. The 48RE Tapshifter unlocks full electronic gear selection, torque converter lock-up control, gear limiting function and a full manual gear mode. The stock transmission is designed to handle the output of the stock engine, but not much more. Increase the durability of your drivetrain with a BD transmission. All transmissions come with BD's heavy duty transmission pan and most packages come bundled with our auxiliary transmission filter kit for added protection!

INSTALL TIME

  • 7 Hours 30 Minutes
  • Includes swapping of sensors and cooler flush

WARRANTY

Parts

  • 36-Months
  • 150,000 Miles

Labor

  • 12-Months
  • 24,000 miles

Note

  • No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.

NOTE

  • BD torque converter must be installed at the time of installation of the transmission - use of a 3rd party or OE converter will invalidate the transmission warranty

EMISSIONS

  • This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)
Videos
Customer Reviews