CALL US NOW
1-800-887-5030

STEERING/SUSPENSION

PART # 1032126

END LINKS (PAIR) CHEVY/GM DURAMAX 2500 HD / 3500HD SILVERADO/SIERRA 2001-2019

2 Reviews

$79.95 USD

Features
  • 1" longer than factory to accommodate upgraded tie rods, and/or leveling kits
  • High-strength through bolt design
  • OEM style bushing shape for articulation and durability
  • Durable Polyurethane bushings
  • Installed in approximately 1 hour
ABOUT THIS PRODUCT

Whether making necessary repairs or upgrades to your steering setup, or running stock to 2" lift or leveling kits, BD's NEW sway bar end links for 2001-2019 Chevy 2500/3500's are your best option to ensure your steering is tight and on the level! Longer, high-strength through bolt design sway bar end links accommodate larger tie rods and leveling kits. Durable polyurethane bushings are designed in the OEM profile to maintain articulation and durability. Leveling kits and lift kits will pull the swaybar out of position, compromising steering geometry. Additionally upgrading tie rods can also cause swaybar interference issues. BD's durable, longer, high-strength, sway bar end links correct sway bar angles and give you the additional clearance you need for those upgraded tie rods. Tighten up the sway bar assembly on your truck and ensure your truck's control is direct and confidence inspiring while avoiding that front end "clunk" that comes with worn out bushings.

INSTALL TIME

  • 1 Hour

WARRANTY

Parts

  • 12-Months

Note

EMISSIONS

  • This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)
Videos
Customer Reviews
2 Reviews
Customer Reviews
5.0 Based on 2 Reviews
5 ★
100% 
2
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
MM
08/25/2024
Michael M.
United States United States

Excellent tie rods

I replaced the OEM tie rods after 6k miles. One never took grease properly and leaked at the roll crimp where the zert is installed. Change out was great. The thread pitch on the inner to outer threaded connection is the same as the OEM so just count the number of turns to get the outer off and apply the same number to the new one. Alignment was unchanged. Make sure to get the longer sway bar links so that you have enough clearance. The wrench flats on the inner is 50mm. I bought a crows foot on Amazon. Torque is 74 ft-lbs. The ride is noticeably more stable with these tie rods.

PS
01/13/2022
Paul S.
United States United States

04 3500 dmax

I'll be getting a set of tie rods and sway bar links for my 02 as well